Lorex L23WD800 Serie Manual Del Usuario página 155

I have configured DDNS for remote access to my system:
Go to www.lorexddns.net and create a new account
Domain: ____________________________________
User ID: ____________________________________
Password: __________________________________
I have configured my system to connect to the DDNS server:
MUST
ATTENTION: You
system's DDNS menu) before attempting remote access.
To enable DDNS on your system:
1. Click the SETUP button (
2. Click SYSTEM SETUP.
3. Click NETWORK.
• The Network window opens.
4. Click the DDNS tab on the left.
• The DDNS window opens.
5. Under USER ID, enter your DDNS user name.
6. Under DOMAIN NAME, enter only the first portion of your DDNS domain from the
confirmation email. For example, if your domain name is tomsmith.lorexddns.net, you only
need to enter tomsmith in the text field.
7. Under PASSWORD, enter your DDNS password.
Click STATUS to verify the DDNS connection.
NOTE:
8. Click APPLY to save your settings or click CANCEL to restore defaults.
9. Click CLOSE to exit.
NOTE:
Once you have saved your DDNS settings, you must reset your DVR for the changes to take effect.
Disconnect and reconnect the power cable from the rear panel to reset the system.
I can access my system from a remote PC:
To access your system remotely:
1. Open Internet Explorer and enter your DDNS address from the confirmation email. For
example, tomsmith.lorexddns.net
NOTE: Remote viewing is compatible with Internet Explorer
2. Log in using your user name and password (by default, user name: ADMIN; password: 1234).
enter your DDNS information
) in the Status Bar.
Setting Up DDNS Service
LOCALLY
(in your
only
.
137