Configuring Alarm Recording Settings - Lorex L23WD800 Serie Manual Del Usuario

Using Web Remote Viewer

Configuring Alarm Recording Settings

You can configure recording parameters for Alarm recording. When an alarm recording is
triggered, these settings automatically activate. For example, in an area with high traffic, you may
want to have higher details, and higher frame rates. In an area with less traffic, you may want less
detail and slower frame rates.
To configure Alarm Recording settings:
1. Click the Alarm sub-menu on the navigation bar on the left (Record>Alarm). The Alarm
Recording Setting window opens.
Figure 23.1 Alarm Recording Setting window.
2. Under Time, drag your cursor across the grayed out boxes to highlight what time you want to
activate Alarm recording. When you release the cursor, the boxes turn pink to confirm your
selection. This is a global setting, and applies to all cameras.
• To configure what time each channel records in alarm mode, click the Activation tab.
Configuring the Activation Tab
Figure 23.2 Alarm Activation window.
To configure the Alarm Activation tab:
• Drag the cursor across the gray channel boxes. Active recording times highlight in purple
boxes. Click OK to save your settings.
3. Under the Resolution drop-down menu, select the desired resolution for the specific
channel.
• Resolution choices are: 352 x 240, 704 x 240, 704 x 480.
108
The FPS counter tells you
how many FPS you have
remaining to assign to
cameras.