Configuring An E-Mail Server For The Dvr - Lorex L23WD800 Serie Manual Del Usuario

Configuring An E-mail Server For The DVR

To configure the e-mail server settings for your DVR:
1. Click the E-mail sub-menu on navigation bar on the left (Network>E-mail).The E-mail
setting window opens.
Figure 23.9 E-mail Setting window.
2. De-select the Default Server checkbox to manually input your e-mail server information.
• By default, the Default Server is left enabled.It is recommended to leave the Default Server on.
• If you select the Default Server checkbox, the system uses the Lorex e-mail server to send
you notification e-mails.
• When the Default Server is left enabled, you cannot configure the e-mail settings.
3. Fill in the blank fields with the appropriate information.
• The blank fields are: Server, Port, Security, User, Password, From.
• Under Server, enter in your e-mail server's SMTP address.
• Under Port, enter the port number of the e-mail server.
• Under User and Password, enter in the e-mail user name and password.
• Under From, enter where the e-mail address is coming from.
4. Click OK to save your settings.
Testing the E-mail Server
• In the Test Email field, enter an e-mail address to receive a test e-mail from the system. Click
the Test button to send out the e-mail. If the e-mail configuration is functional, a success
message appears.
De-select Default Server
checkbox to configure e-mail
settings.
Test Email field
113