Connect The Ethernet Cable; Connect The Usb Mouse; Connect The Power Adapter; Verify Camera Image Quality - Lorex L23WD800 Serie Manual Del Usuario

2. CONNECT THE ETHERNET CABLE

• Connect the ethernet cable to the Network port on the system. Connect the other end of the
ethernet cable to a router.
Network Port
Figure 2.1 Connecting the ethernet cable.

3. CONNECT THE USB MOUSE

• Connect a USB mouse to the USB port on the front panel of the system.
Figure 2.2 Connecting the mouse.

4. CONNECT THE POWER ADAPTER

• Connect the power adapter to the DC12V port in the connection panel.
• Press the POWER button on the front control panel.
The power connector only goes in one way. Do not force.
NOTE:
Figure 2.3 Connecting the power.

5. VERIFY CAMERA IMAGE QUALITY

• Verify that the camera image quality before mounting the cameras to a final location.

6. SET THE SYSTEM TIME

• Set the system time before you begin recording. Inaccurate video time stamps reduces the
effectiveness of surveillance videos.
• For details on setting the time, see "Setting the Time" on page 37.
USB ports
DC 12V Port
Basic System Setup
Ensure that the FLAT SIDE
of the power cord faces out
9