Changing Display Modes; Using Auto Sequence - Lorex L23WD800 Serie Manual Del Usuario

Tabla de contenido

CHANGING DISPLAY MODES

The system has six different display modes as well as an Auto Sequence mode.
Quad
Full-Screen
Figure 5.5 Power/log off options.
To change display modes:
1. Press the DISPLAY button on the front panel twice.
OR
2. Click
(DISP) in the Status Bar.
• The display pop-up window opens.
3. Click on the desired viewing mode:
: Single channel full-screen mode
: Quad
: 6-channel split-screen
: 8-channel split-screen
: 16-channel split-screen
: Auto-sequence.

USING AUTO SEQUENCE

Auto Sequence allows you to view all channels in full-screen in an automatic sequence.
To start Auto Sequence:
1. Click
(DISP) in the Status Bar.
2. Click
(Auto Sequence) in the Status Bar.
You can program more complex sequence in the system's Setup Menu. For details, see
on page 57, under the subsection "Sequence".
6-channel
8-channel
From quad and split-screen view,
double-click any channel to view it in
full-screen. Double-click again to
return to the previous view.
Tip!
Using the System
16-channel
Auto
(16-channel
Sequence
models only)
"Display"
29
Tabla de contenido
loading

Este manual también es adecuado para:

L23wd1600 serie

Tabla de contenido