39 6.1 Recommended Lubricants; 39 6.2 Cleaning And Maintenance; 39 6.2.1 Cleaning Intervals - Bosch TCE 4460 Manual Original

6. Maintenance
6.1 Recommended lubricants
Component
Reduction gear unit
Compressed air system
Tab. 9: Lubricant table
!
The manufacturer does not accept any liability for da-
mage arising from the use of lubricants with properties
differing from those specified (in the standard).
6.2 Cleaning and maintenance
Before performing cleaning and servicing
work, always switch off the TCE 4460 at the
on/off switch and disconnect mains connec-
tor.
Always disconnect the TCE 4460 from the
compressed air supply before performing any
cleaning and maintenance work.
Regular cleaning and servicing of the TCE 4460 is es-
sential to ensure its full performance and proper ope-
ration.
Servicing work must be performed by the operator on
the basis of the manufacturer's specifications as outli-
ned below.
Robert Bosch GmbH
Lubricant Standard
ISO 460
Mineral
DIN 51502-CLP
lubricating oil
ISO 34-98-CC
Mineral
ISO VG 32
lubricating oil
Maintenance | TCE 4460 | 65
6.2.1 Cleaning intervals
The image shows the areas where cleaning is needed in
order to ensure the best possible performance of the
tire changing machine.
Fig. 61: Cleaning areas on the machine
Item Cleaning method
Use cleaning agent and lubricating spray.
A
Clean with a cloth and check condition
B
of guard.
Use cleaning agent and lubricating spray.
C
Check condition of rubber guard
D
(abrasion and cleaning).
Tab. 10: Cleaning intervals
en
x
x
x
x
|
1 695 105 428 2013-11-04