Removal - Bosch TCE 4460 Manual Original

Warning: Risk of injury to limbs!
Extreme caution should be taken when actua-
ting the bead breaker arm, in order to prevent
limbs from being crushed between the tire
and unseating unit.
€
Never reach between the tire and the bead
breaker arm.
Warning: Risk of damage to RFT and UHP
tires!
Crack formation when working on cold tires.
Tire blowout at high speeds.
€
Tire core temperature at least 15 °C.
€
Please refer to the publications of Wdk,
which are available in German and English.
(www.wdk.de: English > Downloads)
€
Store the tires at a controlled temperature
prior to fitting.
Robert Bosch GmbH
Operation | TCE 4460 | 59
5.3.2

Removal

Warning: Risk of injury to hands!
There is a danger of crushing when rotating
the clamping plate.
€
Do not use fingers to reach in between the
tire and the rim.
i
In the case of particularly wide rims, move the moun-
ting column up by 2 positions using the correspon-
ding switch.
1. Press the locking knob to release the extending
mast.
2. Press the pedal for the tilting mounting column to
move the mounting column to the rear.
i
Move the clamping jaws outwards using the cor-
responding pedal in order to clamp the rim on the
outside.
Fig. 53: Clamping on outside
en
|
1 695 105 428 2013-11-04