Safety; Electromagnetic Compatibility - FujiFilm SonoLite M-Turbo Guia Del Usuario

Table 2: ECG on-screen controls
Settings are Slow, Med, and Fast.
Sweep
Speed
Displays Line and Save for clip acquisition delay. (For instructions to capture clips,
Delay
see "To capture and save a clip"
The position of the delay line on the ECG signal. The delay line indicates where the
Line
clip acquisition is triggered.
Saves the current position of the delay line on the ECG signal. (You can change the
position of the delay line temporarily. Starting a new patient information form or
Save
cycling system power reverts the delay line to the most recently saved position.)
Select Delay to display these options.

Safety

Electromagnetic compatibility

The ultrasound system has been tested and found to comply with the electromagnetic compatibility (EMC)
limits for medical devices to IEC 60601-1-2:2007 and IEC 60601-1-2:2014. The ultrasound system is
suitable for use in the professional healthcare facility environment. Active HF surgical equipment causes high
electromagnetic disturbances which may interfere with the ultrasound system operation. The ultrasound
system should not be operated inside an RF-shielded room where magnetic resonance imagery is present,
because it produces high electromagnetic disturbances which may interfere with the ultrasound system
operation. These limits are designed to provide reasonable protection against harmful interference in a typical
medical installation.
Electromagnetic compatibility
on page 4-22.)
5