SHERCO 125 4T Manual De Propietario página 42

2.2 Total distance function (TOD)
This function describes the function/display of the total distance trave-
led. The information is displayed on the 1-5 digits accompanied by the
letters TOD, as shown in figure 2; depending on the unit of measure-
ment selected, the figure is shown in kilometres (default value) or miles.
In normal conditions of use of the instrument, it is not possible to zero
this information. The maximum figure that can be displayed is 99,999
km. (or miles); once this is exceeded, the counter is reset to zero. The
figure shown increases by integer values of 1 km./mile.
fig.2 TOD function
2.3 Clock function (TIME)
This function describes the correct operation/display of the clock func-
tion. This function is always displayed in an hh:mm format, using digits
1-5, as shown in Fig.3. The time may be adjusted only when stationary
by pressing the button (under the TIME function) until only the segments
relative to the clock function and the letters TIME are active, while all the
other segments are switched off (Fig.4).
fig.3 TIME function
42