Tabla de contenido
Programming
The programming modes are used for setting
individual set point temperature, and setting toast
times.
Programming the Set Point Temperature
1. Press and hold the temperature button for six
seconds. A beep will sound, the temperature
indicator light will blink, and the display will show
the current set point temperature. See figure 7.
figure 7
2. To change the set point temperature, use the up
or down arrow. Once the desired temperature is
displayed, press the temperature button to store
the new setting. See figure 8.
figure 8
Adjust Set Point Temperature
Store Set Point Temperature
Printed in USA 4/06 © 2006
3. To cancel the set point programming mode at any
time, press and release the time button. The
display will change to show the actual platen
temperature. See figure 9.
figure 9
Programming Toast Times
1. Press and hold the time button for 6 seconds. A
beep will sound, and the time indicator light will
blink. Release the time button to show the current
toast time. See figure 10.
figure 10
2. Use the up and down arrow buttons to set your
desired toast time. The range is from 20 seconds
to 1 minute, 30 seconds. When the desired time is
reached, press and release the time button to
store the new time. See figure 11.
figure 11
Setting the New Time
Storing the New Time
8
411-561revB
Tabla de contenido
