Control Panel; Programming - Prince Castle TX-230ECE Manual Del Operador

Control Panel

Display
Program LED
Scan Up/Actual Temp
Button
Scan Down
Button
To switch from Fahrenheit to
Celsius, turn the unit off. Press and
hold the DOWN Arrow Button and
turn the unit back on. When you
release the Arrow Button, the dis-
play will be in Celsius.
To switch from Celsius to
Fahrenheit, turn the unit off. Press
and hold the UP Arrow Button when
turn the unit back on. When you
release the Arrow Button, the dis-
play will be in Fahrenheit.
Press the On/Off button.
1
Conveyor will begin to turn
and the display will read L L O O .
L O
To view the actual temperature, press and release the UP or
2
DOWN Arrow Button. The display will show the actual platen
temperature for 5 seconds, then change back to R R D D Y Y .
5 4 0
TX-230ECE 537-530

Programming

Actual Temperature
LED
Setpoint
LED
Set Button
Power On/Off
Button
Temperature displayed
in Celsius
2 8 2
When the unit reaches its
setpoint temperature, the
display will read R R D D Y Y .
R D Y
R D Y
To view the setpoint temperature, press and release the SET
3
Button. The setpoint LED will glow and the setpoint will be
displayed for 5 seconds, then change back to R R D D Y Y .
5 4 0
To change the setpoint temperature, press and hold the SET
4
Button for 6 seconds. The setpoint and program LED's will
glow and the setpoint will be displayed.
Use the UP or DOWN
5
Arrow Buttons to
adjust to the desired
setpoint.
5 4 5
6
TOASTER
TX-230ECE
R D Y
5 4 0
Press and release the
SET Button to save the
new setpoint and return
to the operation mode.
5 4 5
Printed in USA 0320 © 2003