Tabla de contenido
BUN TRAY PLATFORM
1.
Remove the platform from the lower part of the toaster.
2.
Lay the platform on a flat work tabletop and inspect the entire surface to
make sure it is flat.
3.
Using pliers or a hammer, straighten as needed.
4.
Reinstall the platform into toaster.
BUN BOARD
1.
Remove the bun board from toaster.
2.
Lay the bun board on a flat work tabletop and inspect for flatness.
3.
Measure the distance between the tabletop and the bottom side of the bun
board in the front, center, and rear. It should be approximately 1/2" (13 mm)
for all toasters except Big Mac 412 and 416 series, and approximately 3/4"
(19 mm) for Big Mac Toasters.
4.
Bend as needed to maintain flatness.
©2006 McDonald's Corporation
Printed in SEP 2000
Revised in APRIL 2006
Page 6 of 6
Tabla de contenido
