Tabla de contenido
When
Daily, possibly less frequently
depending upon the soil load
Tools
®
McD
Hi-Temp Grill Cleaner
®
McD
All Purpose Super
Concentrate
McD
®
Sanitizer
®
McD
NO-SCRATCH™ Pads
Metal Container Plate
Prince Castle No. 257 Cleaning
Tool Set
Heat Resistant Gloves
Meshed Grill Cloths (6 – 8)
Bucket or other reservoir filled
with lukewarm water
Rice Burger Grill Cleaning Procedure
This procedure covers the recommended daily cleaning of the Prince
Castle 411 Rice Burger Grill.
1.
Remove left over rice burgers, bun tray, and Teflon sheet. Remove any other
components remaining on the placing table.
NOTE: Follow standard food carryover procedures.
2.
Clean the grill in a well-ventilated area.
3.
Start the exhaust fan above the Clamshell Grill.
4.
Heat the grill to the cleaning temperature (480°F/163°C).
NOTE: The Rice Burger Grill must be cleaned at operating
temperature.
5.
Turn the Rice Burger Grill power switch to the OFF position and disconnect
the power plug.
WARNING: There is the possibility of electric shock if cleaning is done
without disconnecting the power plug.
6.
Put on the heat resistant gloves.
7.
Open the grill and mount the red latch to its mating stud on the handle.
8.
Wipe top of the upper platen with a sanitized towel.
9.
Apply the McD
®
NO-SCRATCH™ Pad to the holder located within the
Prince Castle No. 257 Cleaning Tool Kit.
NOTE: Use only the McD
abrasive cleaning pad. Do not scrape or otherwise scratch the heating
platens. The use of metal scrapers, abrasive pads, or wire brushes will
permanently damage the surface of the heating platens.
10. Pour the entire packet of McD
container plate.
11. Use the McD
®
NO-SCRATCH™ Pad to apply McD
onto the surface of the heating platens and along the edges. Dip the flat edge
of the McD
®
NO-SCRATCH™ Pad into the metal container plate and
®
saturate with McD
Hi-Temp Grill Cleaner. Allow the excess to drain into
the metal container plate. Do not scrub while applying the McD
Grill Cleaner. If the surface of the upper heating platen is clean, no cleaning
will be necessary. Allow at least a three minute contact time between the
®
McD
Hi-Temp Grill Cleaner and the surfaces.
NOTE: Ensure the McD
McD
®
NO-SCRATCH™ Pad. Do not apply the McD
Cleaner directly onto the surface of the heating platens. Do not brush or
wash the platens before the McD
12. Lightly scrub surfaces using the McD
Apply more McD
®
Hi-Temp Grill Cleaner as needed.
®
NO-SCRATCH™ Pad. Do not use the green
®
Hi-Temp Grill Cleaner into the metal
®
Hi-Temp Grill Cleaner
®
Hi-Temp Grill Cleaner is applied by the
®
Hi-Temp Grill Cleaner is applied.
®
NO-SCRATCH™ Pad until clean.
©2006 McDonald's Corporation
Revised in APRIL 2006
®
Hi-Temp
®
Hi-Temp Grill
Printed in SEP 2000
Page 3 of 6
Tabla de contenido
