Tabla de contenido
Level 4. See figure 3.
2. While holding the time and temperature buttons,
press the up or down arrow buttons to adjust
the sound level. A continuous tone will sound.
Release all buttons when the desired sound
figure 4
level is reached. The display will show the
current sound level. See figure 4.
VIEW SET POINT TEMPERATURE
1. Press and release the temperature button. (Do not
hold for more than 6 seconds.) A beep will sound,
the temperature indicator will turn on, and the
display will show the set point temperature for
three seconds. The display will then change to
show the actual temperature. See figure 5.
SET POINT TEMPERATURE
figure 5
ACTUAL TEMPERATURE
VIEW TIMER SETTING
1. Press and release the time button. (Do not
press the time button for more than 6 seconds.)
The set time will be displayed for three sec-
onds. If the timer is activated and is in a count-
down sequence, the time remaining will be
displayed, and will continue to countdown to
zero. After three seconds, the display will
2000 McDonald's Corporation
All Rights Reserved
A L 2
2 1 5
2 1 6
Part No. 411-543 Rev C
figure 6
change to show actual platen temperature. See
figure 6.
PROGRAMMING
The programming modes are used for setting indi-
vidual set point temperature, and setting toast times.
Programming the Set Point Temperature
1. Press and hold the temperature button for six
seconds. A beep will sound, the temperature
indicator light will blink, and the display will show
figure 7
the current set point temperature. See figure 7.
2. To change the set point temperature, use the up
or down arrow. Once the desired temperature is
figure 8
ADJUST SET POINT TEMPERATURE
STORE SET POINT TEMPERATURE
6
SET TIME
2 0
215
2 0 4
2 0 4
Printed in the
United States of America
Tabla de contenido
Solución de problemas
