Preparing The Govac Bp For Operation - ProTeam GoVac BP El Manual Del Propietario

PREPARING THE VACUUM FOR OPERATION
Figure A
1. Verify the charge level of the battery
pack by pressing the power level indi-
cator button on the inside of the pack
(Figure A). A fully charged battery
pack will display 5 green lights.
Figure C
3. Lay the shoulder straps over the top of
the vacuum so they are out of the way
(Figure C).
Figure E
5. Lower the battery pack into place by
sliding it in between the two alignment
plates on the vacuum waist belt assem-
bly (Figure E).
7. Re-connect shoulder straps for operation.
8
O P E R A T I O N
2. If no charge is needed, unhook the
shoulder straps from the waist belt on
the vacuum cleaner (Figure B).
4. Lift the battery pack over the back of
the vacuum making sure the inside of
the battery pack is faced towards the
back of the vacuum (Figure D).
6. While sliding the battery pack into
place, make sure the power connec-
tor is fully locked into place with the
vacuum connection (Figure F). Both
power connectors on the inside of bat-
tery pack should be flush.
Figure B
Figure D
Figure F