Preparing The Battery Pack For Charging - ProTeam GoVac BP El Manual Del Propietario

CHARGE BATTERY FIRST FOR OPTIMUM PERFORMANCE

PREPARING THE BATTERY PACK FOR CHARGING

Figure A
1. Make sure the power switch on the
charger is in the off position and plug
the charger's power cord into the charger
(Figure A).
Figure C
3. Plug the charger's power cord into 120
V wall outlet (Figure C).
Figure E
5. The left indicator light should turn Red
and remain lit. The right indicator light
will turn Yellow when charging and Green
when fully charged (Figure E). The battery
pack may require up to 3 hours to fully
charge.
*Battery pack may get warm while charging.
O P E R A T I O N
2. Plug the charger cord into the battery
pack as shown (Figure B). A clicking noise
will indicate a correct connection.
4. Flip power switch on the charger to on
position (Figure D).
6. Verify the charge level of the battery
pack by pressing the power level indicator
button on the inside of the pack (Figure F).
Five green lights indicate a fully charged
battery. Remove plug from wall outlet
after charging.
Figure B
Figure D
Figure F
7