WARNING - To reduce the risk of fire, explosion, or damage to Vacuum:
!
• DO NOT leave Vacuum running while unattended - you may fail to notice
important signs indicating abnormal operation such as loss of suction, debris/
liquid exiting the exhaust, or abnormal motor noises. Immediately stop using
Vacuum if you notice these signs.
• DO NOT leave Vacuum plugged in when not in use.
• DO NOT continue running when float has cut off suction.
• Sparks inside the motor can ignite airborne flammables. DO NOT operate Vacuum
near flammable liquids or in areas with flammable gases, vapors, or explosive/
airborne dust. Flammable liquids, gases, and vapors include: lighter fluid, solvent-
type cleaners, oil-based paints, gasoline, alcohol, and aerosol sprays. Explosive
dusts include: coal, magnesium, aluminum, grain, and gun powder.
• DO NOT vacuum up explosive dusts, flammable liquids, or hot ashes.
WARNING - To reduce the risk of electric shock or injury:
!
• DO NOT expose to rain or allow liquid to enter motor compartment. Store
indoors.
• DO NOT handle plug, switch, or Vacuum with wet hands.
• Unplug Vacuum before servicing. If your Vacuum is not working as it should,
has missing parts, has been dropped, damaged, left outdoors, or dropped into
water, return it to an independent service center or call customer service.
• When using an extension cord, use only outdoor-rated cords that are in good
condition. DO NOT allow the connection to come into contact with liquid.
After you plug the power cord into the
outlet, turn the unit on by pushing the
switch from position "O" to position "l".
The symbols used on the switch actuator
are international "ON & OFF" symbols.
= OFF
Familiarize yourself with the accessories
included with the Vacuum. Each
accessory may be used in various ways for
vacuuming debris. Here is a list of possible
accessories and their uses.
Hose Assembly - Provides transfer of
vacuum capability to work site. Provides
the means of attaching extension wands
and hand tools.
Dust Brush - Use for detail cleaning in
small spaces.
Floor Brush Tool - Use for large dry area
clean-ups on smooth surfaces.
Squeegee Tool - Use for large wet area
clean-ups on smooth surfaces.
ProTeam
OPERATION
Crevice Tool - Use to pick up debris in
hard to reach locations.
2-Piece Wand - Use to connect hose to
wet or dry floor tools.
= ON
Dust Brush
2-Piece
Wand
Floor Brush
Tool
Squeegee
Tool
Crevice Tool
Hose
Assembly
9