Preparation For Operation; Getting Started; Caster Assembly - ProTeam ProGuard 4 Portable Manual Del Propieratio

PREPARATION FOR OPERATION

GETTING STARTED

This Wet/Dry Vacuum is intended for commercial use. It may be used for light
vacuuming of wet or dry media and may be used as a blower. The lightweight design
allows usage for most small vacuuming chores. Familiarize yourself with the
following product and features and read the entire manual for specific usage of your
new Wet/Dry Vacuum.
Familiarize yourself with the controls and features of your Wet/Dry Vacuum before
operating (Figure A).
Vacuum Port Inlet
Hose
Figure A

CASTER ASSEMBLY

1. Turn the tank upside down on the
floor.
2. Insert the caster stem into the socket
on the bottom of the tank, as shown
(4 places). (Figure B).
3. Push the caster until the ball on the
caster stem is inserted all the way
into the socket. You will hear the ball
snap into the socket and the caster
will swivel easily when positioning is
correct.
4. Turn the tank upright.
6
Handle
Switch
Tank Latch
Power
Cord
Caster (4)
Socket (4)
Tank
Figure B
Power
Head
Tank
Casters
Caster Stem
Caster Ball
ProTeam