Compex performance Manual Del Usuario página 311

- ELECTROMAGNETIC IMMUNITY
The Compex Performance is designed for use in the electromagnetic
environment stipulated below. The buyer or user of the Compex
Performance must ensure it is used in this recommended environment.
Floors must be wood, concrete or ceramic tiles. If floors are covered with synthetic material,
the relative humidity must be maintained at a minimum of 30%.
The quality of the power supply should be that of a typical commercial or hospital environment.
The quality of the power supply should be that of a typical commercial or hospital environment.
The quality of the power supply should be that of a typical commercial or hospital environment. If
the Compex Performance user requires continuous operation during mains power cuts, we
recommend that the Compex Performance is powered by a UPS or a battery.
Magnetic fields at the mains frequency should be at the level of a representative site located in
NOTE: VT is the AC supply voltage before application of the test
level.
Electromagnetic
environment - recommendations
a typical commercial or hospital environment.
309