Cleaning Products; General Information; Cleaning Of The Outer Parts (Daily / Weekly) - Arneg Osaka 3P Serie Guía De Instalación Y Manejo

Ocultar thumbs Ver también para Osaka 3P Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 110
O s a k a 3 P
Verti cal multi -deck & Semi-verti cal
English
ATTENTION! Cold surfaces. Injuries, burning. Glass breakage.
Wait for the glass parts to reach room temperature.
DO NOT use hot water on the cold glass surfaces.
Protect the hands with work gloves
i
The products will deteriorate due to germs and bacteria.
Compliance with Hygiene Standards and the cold chain is indispensable to guarantee the
protecti on of consumer health
The cleaning operati ons must include:
S t e p
N a me
1
Washing
Sanitati on
2
3
Rinsing
4
Drying

21. 1 Cleaning products

Use
- clean water at maximum temperature of 30°C
- soft cloth
- mild and neutral detergents
Do not use
- detergents or similar products to clean the parts in methacrylate (Plexiglas)
- in powder
alcohol-based
- with granules
- either acidic or alkaline (bleach, ammonia)
- concentrates
- with unknown chemical compositi on
- abrasive products, chemical/organic solvents
- abrasive sponges, scourers, sharp tools
- aggressive solvents (aceti c acid, citric acid etc.)
21. 2 General informati on
• The surfaces to be cleaned and the detergents and water used for cleaning must not exceed a
maximum temperature of 30°C.
• Dry the surfaces with a soft cloth
ATTENTION!
Fragile surfaces, glass. Dents, scratches, corrosion, wounds, broken glass
DO NOT aim the jet directly at the varnished or plasti cised surfaces
DO NOT apply the detergents directly onto the surfaces to be cleaned
DO NOT use steam cleaning equipment
DO NOT use excessive force
DO NOT bring the jet too close to the dirt. This may cause injury to the operator and con-
taminate parts that have already been cleaned, as well as the environment.
avoid detergents from coming into contact with nearby products.
ATTENTION!
Floor products. Vapours. Corrosion. Breathing diffi culty.
Avoid contact, inhaling.

21. 3 Cleaning of the outer parts (Daily / Weekly)

Clean all external parts of the cabinet every week. See "General instructi ons" chapter 21. 2.
48
Mechanical roughing, removal of approximately 97% of the dirt
Eliminati on of bacteria and harmful substances
Descripti on
05060184 01 25-11-2019
Tabla de contenido
loading

Tabla de contenido