NuWave Brio 14Q El Manual Del Propietario página 13

INSTRUCTIONS
4. When the Brio reaches the preheat temperature, the
unit will beep once and begin a 5-minute countdown.
"5" will flash and "ready" and "temp" will be displayed.
• The Brio will maintain the preheat temperature
during the 5-minute countdown.
• Cooking temperature can be adjusted during the
5-minute countdown by pressing the up or down
arrows. Cooking time can be adjusted by pressing
"TIME" and then pressing the up or down arrows.
• If no action is taken within the 5-minute countdown,
the Brio will automatically go into standby mode.
5. Place food into the unit, close the door. The Brio will
begin cooking at the set temperature and time.
6. When the Brio is finished cooking, "End" will be displayed
and the unit will beep three times.
Note: Preheat can be canceled at any time by pressing
"ON/OFF". When preheat is canceled, the Brio will end the
preheat cycle and automatically go into the next cooking cycle.
Sear
Sear 1 will always be directly BEFORE regular stage
cooking. Sear 2 will always be directly AFTER regular
stage cooking.
Sear 1
Default sear 1 temperature is 400°F ("400F") and default
sear 1 time is 5 minutes ("00:05").
1. Press "ON/OFF". Adjust cooking temperature and time
for regular stage cooking.
2. Press "SEAR" once. "400F", "sear", "1" (flashing), and
"temp" will be displayed.
• Press the up or down arrows to adjust the
temperature for sear 1. 400°F is the maximum
searing temperature.
3. Press "TIME". "00:05" and "time" will be displayed.
• Press the up or down arrows to adjust the time for
sear 1. Time can be adjusted up to 5 min. (00:05).
4. Press "START/PAUSE" to begin cooking. "sear",
"1" (flashing), "time", and the set sear time ("00:05",
default) with the ":" flashing will be displayed.
5. Once sear 1 is complete, the unit will beep once and
automatically go into (regular) stage cooking.
24 24
instructions
6. When the Brio is finished cooking, "End" will be displayed
and the unit will beep three times.
Sear 1 2
Sear 1 2 is used to sear before and after regular
stage cooking.
1. Press "ON/OFF". Adjust cooking temperature and time for
regular stage cooking.
2. Press "SEAR" twice. "400F", "sear", "1" and "2"
(flashing), and "temp" will be displayed. Press "START/
PAUSE". The unit will sear at 400°F for 5 min (sear 1),
regular stage cooking, then sear again at 400°F for 5
min. (sear 2).
3. To set a different temperature and time for Sear 1 and 2,
press "SEAR" once and adjust Sear 1 temperature and
time. Press "SEAR" again. "400F", "sear", "1", "2"
(flashing), and "temp" will be displayed. Adjust Sear 2
temperature and time.
4. Press "START/PAUSE" to begin cooking. "sear", "1"
(flashing), "2", "time", and the set sear 1 time with the ":"
flashing will be displayed.
• Once the Sear 1 cycle is complete, the unit will beep
once and automatically go into regular stage cooking.
"sear 2", "time", and the set regular stage cooking time
with the ":" flashing will be displayed.
• Once the stage cooking cycle is complete, the unit will
beep once and automatically go into Sear 2 cooking.
"sear", "2" (flashing), "time", and the set sear time with
the ":" flashing will be displayed.
5. When the Brio is finished cooking, "End" will be displayed
and the unit will beep three times.
Example: Sear food at 400°F for 3 min. (Sear 1), cook food
at 360°F (default) for 15 min. (default), and sear again at
380°F for 5 min. (Sear 2):
Press "ON/OFF". Default setting for regular cooking
temperature and time will be displayed. >> Press "SEAR"
once. "400F" (default) will be displayed. >> Press "TIME".
Press up or down arrows to adjust time to "00:03". >>
Press "SEAR" again. Press up or down arrows to adjust
temperature to "380F". >> Press "TIME". "00:05" (default) will
be displayed. >> Press "START/PAUSE".
25 25
nuwavenow.com nuwavenow.com