NuWave Brio 14Q El Manual Del Propietario página 12

INSTRUCTIONS
5. The following are temperature and time ranges:
• 60°F-200F: 00:00-99.99 (0 minutes to 99 days,
99 hours)
• 205°F-275°F: 00:00-99:99 (0 minutes to 99 hours,
99 minutes)
• 280°F-345°F: 00:00-10:00 (0 minutes to 10 hours)
• 350°F-400°F: 00:00-01:00 (0 minutes to 1 hour)
Stage
Stage cooking is used to cook foods at different
temperatures and times throughout the cooking
process. Up to 5 stages of cooking can be set. Delay,
Preheat, Sear 1, Sear 2, and Warm are NOT considered
stages in the cooking process.
1. Stage 1: Press "ON/OFF". "360F" and "temp" will
be displayed.
• Adjust cooking temperature by pressing the up or
down arrows.
• Default temperature and time for Stage 1 cooking is
360°F for 15 minutes ("360F" for "00:15").
2. Press "TIME". "00:15" and "time" will be displayed.
• Adjust cooking time by pressing the up or
down arrows.
3. Stage 2: To add additional stages, press "STAGE" once.
"360F", "temp", "stage", and "2" (above "stage") will
be displayed.
• Adjust Stage 2 cooking temperature by pressing the
up or down arrows.
4. Press "TIME". "00:00", "time", "stage" and "2" (above
"stage") will be displayed.
• Adjust Stage 2 cooking time by pressing the up or
down arrows.
• For only two stages of cooking, leave the time at
"00:00" for stages 3-5 and those stages will
be skipped.
5. Press "START/PAUSE" to begin cooking. The Brio will
cook with the set temperature and time for each stage.
• When the unit is finished cooking, "End" will be
displayed and the unit will beep three times.
22 22
instructions
6. To set additional stages with cooking settings, repeat
steps above. The number above "stage" will change
each time "STAGE" is pressed, after setting the
temperature and time.
• After the temperature and time is set for Stage 5, if
"STAGE" is pressed again unit will go back to Stage
1 and the set cooking temperature, "temp", "stage",
and "1" (above "stage") for Stage 1 will be displayed.
Notes:
• The display will only indicate the stage cooking number
when two or more stages are used. Display will not show
stage cooking number if only one stage of cooking is used.
• During cooking, press "STAGE" to see and adjust
upcoming cooking stages.
• Stage 1 default: "360F", "00:15". Stages 2-5 default:
"360F", "00:00".
• If no time is set for stages 2-5, those stages will be
skipped in the cooking cycle.
Preheat
The Preheat function ensures the Brio reaches desired
temperature before cooking begins. Preheat is perfect for
foods that require a crispier finish such as frozen appetizers,
French fries, or chicken wings.
1. Press "ON/OFF". Adjust cooking temperature and time
by pressing the up or down arrows.
2. Press "PREHEAT". The set cooking temperature, "pre",
and "temp" will be displayed.
• The Brio will ALWAYS preheat to the cooking
temperature of the next cooking cycle.
3. Press "START/PAUSE". The unit will begin preheating to
the set temperature. The set cooking/preheat temperature
will flash, and "pre" and "temp" will be displayed.
• During preheat, the cooking temperature can be
adjusted by pressing the up or down arrows.
• Cooking time can be adjusted by pressing "TIME",
and then pressing the up or down arrows.
23 23
nuwavenow.com nuwavenow.com