OVEN OPERATION
Clean
During clean, the oven is heated to an extremely high tem-
perature to burn off food soil. Oven lights are disabled.
Setting controls:
Touch QUICK START, then select CLEAN. For profes-
1
sional model, turn selector knob to MORE, then select
CLEAN on the control panel.
Remove oven racks and rack guides, then touch OK.
2
Touch START.
3
Touch OFF to end mode. For professional model, turn
4
selector knob to OFF.
Oven door will lock and remain locked until the clean
5
cycle has ended and oven temperature has cooled
below 290°C.
CAUTION
During clean, exterior surfaces may get hotter than
usual. Children should be kept away.
|
10
English
WF Intl MOven UCG 9005946A.indd 10
Oven Light
WARNING
Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric
shock.
Allow the oven to cool completely, then remove oven racks
and rack guides. To remove the light cover, gently pry the
bottom edge with a flat screwdriver. Remove the existing
bulb and replace with a 40-watt halogen bulb. Refer to the
illustration below.
To replace the light bulb located on the top of the oven
cavity, contact Wolf factory certified service.
LIGHT
COVER
Light bulb replacement.
CARE RECOMMENDATIONS
Care Recommendations
CLEANING
Stainless steel
Use a nonabrasive stainless steel cleaner and apply with a soft lint-free cloth. To bring out the natural
luster, lightly wipe surface with a water-dampened microfiber cloth followed by a dry polishing chamois.
Always follow the grain of stainless steel.
Black glass
Spray glass cleaner on a cloth to clean.
Oven racks and guides
Remove and place on a flat surface near the sink. Clean with hot water and mild detergent or paste of
baking soda and water. Do not immerse in water. Towel dry.
Control panel
Use spray degreaser to remove fingerprints and food soil. Spray on a cloth before wiping panel.
IMPORTANT NOTE: Do not spray cleaners directly on control panel.
Oven interior
Before utilizing the clean feature, use a razor blade to gently lift baked on foods from the oven cavity and
window. For stubborn stains, spray with a mild abrasive cleaner or spray degreaser and scrub with a no-
scratch pad. Wash the entire oven cavity with soap and water to remove all cleaning chemicals before
entering the clean cycle. If residue is not cleaned from the cavity, etching of the porcelain may occur.
Once the clean cycle is complete, allow the oven to cool completely and wipe out ash with a damp cloth.
6/29/15 3:42 PM