baltur GI 350 DSPG Manual De Instrucciones página 35

FUEL FEEDING HYDRAULIC DIAGRAM FOR ONE OR MORE LIGHT OIL BURNERS WITH MAXIMUM NOMINAL
VISCOSITY (5 °E at 50 °C) FROM 75 TO 300 DSPG
1 Main cictern
2 Filter
3 Circulation pump
4 Water and system drain
6 Fuel recovery and degasifier
7 One-way valve
8 By-pass (usually closed)
9 Feeding circuit presure regulator
adjustment range between 0.2 and 1 bar
10 Pressure gauge (0 - 4 bar)
DIAGRAM OF PIPES OF FEED SYSTEM FOR LIGHT OIL BURNERS WITH MAXIMUM NOMINAL VISCOSITY
(5 °E at 50 °C)
1 Main cictern
2 Filter
3 Circulation pumps
4 Water and system drain
5 Air-gas drain usually closed
6 Fuel recovery and degasifier
7 One-way valve
8 By-pass (usually closed)
The combustible recovery and degasifier tanks (diameter ~ 150, height
~ 400) should be installed as near as possible to the burner and should
be about 0,5 m. higher with respect to the burner's pump.
The combustible recovery and degasifier tanks (diameter ~ 150,
height ~ 400) should be installed as near as possible to the burner
and should be about 0,5 m. higher with respect to the burner's pump.
7 / 24
0006080098_201109
E
N
G
L
I
S
H