Oursson BM0801J Manual De Instrucciones página 14

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
SAFETY INSTRUCTIONS, Pic. A
Danger symbol
A reminder to user about high voltage.
Warning symbol
A reminder to user about the necessity of operating exactly according to the
instructions.
When using electrical appliances should take the fol-
lowing precautions:
• Use the device according to the following instruc-
tions manual.
• Install the device on a stable surface.
• Use only the tools, which are included in the product
set.
• To protect against risk of electrical shock do not
put the cord in water or other liquid. If for some
reason the water got into the unit, contact an
authorized service center (ASC) OURSSON
AG.
• For power supply, use a power grid with proper
characteristics.
• Do not use the device in areas where the air can
contain vapors of flammable substances.
• Never attempt to open the device by yourself –
it could possibly be the reason of an electrical
shock can lead to product malfunction and will
invalidate the manufacturer's warranty. For re-
pair and maintenance, contact only authorized
service centers meant for repair of products
under the trademark OURSSON.
• When moved from a cool to a warm place and vice
versa unpack it before use and wait 1-2 hours with-
out turning it on.
• In order to prevent electrical shock do not im-
merse the entire product or the wires into the
water.
• Be particularly careful and cautious when using the
device near children.
• Do not touch any hot parts, as this may cause injury.
• The power cord is specially made relatively short in
order to avoid the risk of injury.
• Do not allow the cord to hang over the sharp edge of
the table or touch hot surfaces.
• Do not connect this device to a grid which is over-
loaded with other appliances: it can lead to the fact
that the device will not function properly.
• Do not install the device near gas and electric stoves
and ovens.
• After use, make sure to disconnect the device from
the power grid.
• Keep the device from bumps, falls, vibration and
other mechanical influences.
• Make sure to disconnect the device from the power
grid before cleaning or changing accessories.
• Do not use the device outdoors.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge. They can only use the device under
14
the supervision of the person responsible for their
safety, or after instruction on the safe use of the de-
vice. Do not allow children to play with the product.
• This product is intended only for use in the home.
• If the power cord is damaged, it must be replaced
by a specialist from the authorized service center (
ASC ) OURSSON AG to avoid danger.
• Use only the tools, which are included in the product
set.
• When cleaning the appliance do not use abrasives
and organic cleaners (alcohol, gasoline, etc.). When
cleaning the device it is allowed to use a small
amount of neutral detergent.
When you turn it on for the first time, there may
be a slight burn smell, which may be emitted
during the first heating of the heating element
of the device. During next uses, this smell won't
be emitting.
The operation of this device in any case does
not imply application of any force to it, as this
may damage the product due to user fault.
RECOMMENDATIONS
• Please read the instruction manual before using the
device. Keep the manual after reading for further use.
• All illustrations in this manual are schematic
representations of real objects, which may differ from
the actual images.
• Unpack the device and remove all packing material.
Wipe the body and inner surface with a clean dry cloth
do not use abrasive cleaners.
The lid may be opened only when you need
to add different ingredients and only when you
hear a sound signal. When it is working, do not
open the lid and do not remove the baking mold.
• Do not immerse the baking mold into the water.
• Be careful when using the mold, any damage to the body
may lead to malfunction of the mold.
• T o remove the kneader easier, fill the mold with water and
wait for 10-20 minutes. Carefully, slightly turn and remove
the spatula then wash the mold with a soft sponge and
wipe it dry.
• Do not use hard objects like knife or fork to remove
bread from the mold. If it is hard to remove the bread,
let the mold cool for 5-10 minutes, make sure it is not
left in place where it can easily lead to a burn. After that,
use mitts and shake the baking mold few times. Hold
the handle so that it does not interfere with the recess
of bread.
EN
RU
Tabla de contenido
loading

Tabla de contenido