Corghi ProLine Truck 150 Manual De Uso página 107

Fig. 27 Hidden Weights Program: valid and invalid conditions for use.
VALID
The angle between
weights W1 and W2 is <
120° and includes initial
external weight W.
The Hidden Weights program is used for aluminium rims when:
• you want to hide the external weight behind two spokes for aesthetic reasons;
• the position of the external weight coincides with a spoke therefore it is not applied.
NOTE: This function can be used with any program type and with any wheel type. It can
also be used to divide the static weight into two separate weights
To use this program, proceed as follows:
1. Perform wheel balancing without applying the external weight.
2. Rotate the wheel manually until all external imbalance search LEDs light up.
3. Press [F+P5]
balanced on the external side, the machine will display error code Err 050 to indicate that
the operation is not allowed.
4. If the CLIP configuration is enabled to apply the adhesive weights, turn the wheel again
until the central element of the outer side (W) position indicator lights up
5. If instead there is an imbalance on the external side, the machine will display the message
shown in Figure 27a.
User manual ProLine Truck 150
NOT VALID! (Invalid)
The angle between
weights W1 and W2 is ≥
120°.
+ to run the Hidden Weights program. If the wheel is
27
NOT VALID! (Invalid)
The position of the
external imbalance W is
not within W1 and W2.
27a
UK
107