Installing The Windows Vista Driver - Abaxis VETSCAN VS2 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

d. Touch
e. Touch
The display shows
transmitting.
20. Check the HyperTerminal window to
confirm that the results were transmit-
ted.
If the results do not appear to have
transmitted, contact Abaxis Technical
Service 24 hours a day, 7 days week, at
1-800-822-2947.
21. Close HyperTerminal. Click
settings.

11.4 Installing the Windows Vista Driver

Use this procedure to install the Abaxis driver that enables the analyzer to communicate with a PC run-
ning Windows Vista. The analyzer installs on the PC as a virtual communication port in Windows.
Installation requires the following:
VetScan VS2 Analyzer
PC with Windows Vista and a free USB port
Type A/Type B USB cable
Abaxis Driver CD (software files: P/N 110-5001)
Note:
Driver installation in Windows Vista requires a user account with administrative privi-
leges.
The screenshots in these instructions are from a typical Vista installation. Some of these
screens may vary slightly on your system.
, and make sure
Xmit
.
Results
Sending Report...
Yes
Connecting to an External Computer
is not selected.
Print
while the results are
to close the connection, then
to discard the connection
No
11-7
Tabla de contenido

Solución de problemas

loading

Tabla de contenido