Remote Control Parameters - Cardin Elettronica SL Serie Manual Del Usuario

7) Remote control parameters

7a) Encoding
• With highlighted, press PROG/OK
ENCODING
• Press PROG/OK to scroll between the available choices:
- S4XX (series S449 - S486) - S500 (series S504 - S508)
• Press the arrow button
and move to the next parameter.
Attention: Before changing the encoding type you must first switch the type of memory module from S4XX
(24LC16B) to S500 (24LC64B) and vice versa with the programmer switched off.
7b) Memorise
• Press PROG/OK to access the sub menu.
• Follow the below mentioned instructions to memorise one or more radio channels A-B-C-D. For
more information follow the instructions in the chapter
- S4XX (series S449 - S486) - S500 (series S504 - S508)
• Press the arrow button
In the example, channel B has been added. Attention: Channel are only present when using S500 encoding.
MEMORISE
PRESS the
[Nr....]
transmitter
* * * * * * * * * * * * * * * channel
[A---]
to memorise
* *
* ACTIVATION 1
*
* *
* * * * * * * * * * * * * * *
to confirm the choice eg. S500. The programmer will save the choice
REMOTE CONTROL
to move the next parameter.
MEMORISE
[Nr....]
* * * * * * * * * * * * * * *
[AB--]
* *
* ACTIVATION 2
*
* *
* * * * * * * * * * * * * * *
MEMORISE
PRESS the
[Nr.....]
same
transmitter * * * * * * * * * * * * * * *
[AB--]
channel
*
again
CODE
*
MEMORISED
*
* * * * * * * * * * * * * * *
68
7a) Encoding
ENCODING
MEMORISE
CANCEL
CLEAR ALL MEMORY
CHANNEL FUNCTION
EXIT
7b) Memorise
ENCODING
MEMORISE
CANCEL
CLEAR ALL MEMORY
CHANNEL FUNCTION
EXIT
*
*
*
S500
S500