Idiomas disponibles
Idiomas disponibles
. Operating the appliance
.. Switching on the appliance
Connect the appliance to an earthed mains socket.
The local mains voltage must match the voltage stated in the technical specifica-
tions for the appliance.
.. Temperature control
The thermostat setting automatically adjusts the temperature in the freezer.
There is a choice of the following 3 basic settings on the thermostat; the tempera-
ture can also be set to any level between MIN and MAX:
MIN
NORMAL
MAX
Before storing fresh foods, set the thermostat to MAX. After 2 hours, set the
temperature control to NORMAL, for example, depending on the intended
storage period.
Check the temperatures in the freezer compartment with a thermome-
ter. The ideal temperature and standard setting is -18 °C in the freezer
compartment when set to NORMAL. Once the freezer temperature is
reached, you can load it with food.
The internal temperatures can be influenced by factors such as the in-
stallation location, ambient temperature and the number of times the
door is opened. Take these factors into account when setting the tem-
perature.
.. Switching off the appliance
To isolate the appliance from the power supply, set the thermostatic control to
MIN and pull the mains plug out of the socket.
Wait approx. 10 minutes before switching on the appliance again.
.. Tips on saving energy
The energy consumption will be lowest if the wire shelf is left inside the appli-
ance when it is in use.
Do not position the appliance near a heat source (radiator or cooker etc.).
182
Lowest level of cooling
(warmest)
Intermediate position
Highest level of cooling
(coldest)
Short-term storage of frozen
products
Medium-term storage of frozen
products
Long-term storage of frozen
products
