.. Transport
CAUTION!
Risk of injury!
The appliance is heavy. There is a risk of injury from the
strain of lifting the appliance.
Seek the assistance of at least one other person in order to
move the appliance.
NOTICE!
Possible material damage!
Risk of damage to the appliance if transported incor-
rectly.
Ensure that no part of the refrigerant circuit is damaged when
transporting and installing the appliance.
Where possible, always transport the appliance upright. If tilt-
ed to an angle of more than 40° during transport, wait 4 hours
before connecting it to the mains and switching it on to ena-
ble the refrigerant circuit to settle after transport.
Do not place the appliance on its side or back, as this can
cause oil from the compressor to enter and block the refriger-
ant circuit.
Do not expose the appliance to rain or spray water.
.. Installation and electrical connection
...
Location
NOTICE!
Possible material damage!
Risk of damage to the appliance due to improper han-
dling.
Install the freezer in a dry and ventilated room. The room
should be around 4 m², so there will be sufficient air volume
available if the cooling system becomes damaged.
DE
FR
NL
ES
IT
EN
169