Use a spanner (width across of 10 mm)
to unscrew the pin on the lower hinge
(3) and when doing so hold in place
with a flat-head screwdriver to remove
the pin.
Turn over the hinge and reinsert the pin
and locking washer.
Screw the lower hinge on the left-hand
side again. Screw in the adjustable foot
(4) on the right-hand side.
Stand the appliance upright again.
While doing so, hold the appliance door
(2) quite firmly in place.
Before screwing the upper hinge back
on, ensure that the door closes flush
with the appliance housing horizontally
and vertically so that all seals close.
Then put the upper hinge back in place
and screw on the hinge with the three
screws. Use a spanner to tighten the
screws.
180