GENERGY NATURA Serie Instrucciones De Uso página 70

2 Place an appropriate container under the oil draining hole to collect the drained
gasoline.
3 Using a screwdriver, loosen the carburetor draining screw. Gasoline will begin
streaming from the carburetor draining hole. Once all of the gasoline is drained,
tighten the draining screw again.
4 Remove the spark plug (see page 27) and pour a tbsp of clean motor oil (10 ~
20 ml) in the cylinder. Pull the startup handle gently, this will make the engine
spin and distribute the oil. Then install the spark plug again.
5 Pull the starter rope slowly until you feel resistance. In this point, the piston is
rising in its compression stroke and the intake and exhaust valves are closed. This
position helps protecting the engine against internal corrosion.
DRAINING HOLE
DRAINING SCREW
67