GENERGY NATURA Serie Instrucciones De Uso página 52

1
Connect the feeding hose (not included) in the regulator (not included) fix with a
clamp.
2
Connect the connector supplied to the other side of the hose. Now connect the
connector to the "Propane Input" located on the generator panel, first adjust
screwing by hand and then tighten with a spanner.
HOSE
PROPANE BOTTLE
Before using the equipment check the tightness of propane hose connections, for
this first open the tap regulator of the propane bottle to keep pressure in hose.
Then spray hose connections with a soapy water spray, if any leakage, small
bubbles will be observed. Once discarded any gas leak clean and dry the soapy
water.
If you see or smell a leak but cannot locate or correct it, close the regulator valve
of the bottle and call a plumber or local gas installer to perform a proper
connection.
49
PRESSURE
REGULATOR