Idiomas disponibles
Idiomas disponibles
ENGINE STARTING
1 - Make sure that the control lever is in neutral
position.
2 - Turn the ignition key to ON.
This position activates an automatic test which
checks if the dashboard is operating:
- A short lasting acoustic sound is generated.
- The VM logo appears on the display.
- The instrument hands (engine rpm - battery
voltage - engine oil pressure - engine tempera-
ture) move to full scale, then position themselves
according to the value transmitted by the respec-
tive sensor.
- The red lamps, respectively inside the instru-
ments: battery voltage - engine oil pressure -
engine temperature, light up for a short time, then
switch off.
3 - Wait for the end of the automatic control se-
quence.
4 - Press the START button to start the engine.
5 - Keep the engine running at idle speed.
6 - Visually check that the dashboard instrumen-
tation is operating correctly and displays normal
readings.
IMPORTANT
To facilitate the starting and the fuel com-
bustion process, the engine is equipped with
ceramic glow plugs located inside the respec-
tive combustion chambers. The glow plugs
are controlled by the engine control unit by
English
IMPORTANT
or failure to turn off the engine oil pressure
warning light, or other engine malfunction,
please contact an authorised VM MOTORI FCA
ITALY workshop.
- For warming up the engine, maintain a speed of
1000 / 1200 rpm until the engine temperature has
stabilised within the normal values of 80°C - 95°C
/ 176°F - 203°F.
In any case, start normal boat operations only
when the engine temperature has reached 80°C -
95°C / 176°F - 203°F.
IMPORTANT
During the engine running-in period, follow the
operating instructions on page 23.
27
MR 506
42432070F
Ed.1 - Nov. 2019
GB
