Idiomas disponibles
Idiomas disponibles
SAFETY WARNINGS FOR THE ENVIRONMENTAL IMPACT
The procedures to be followed to identify any
GB
account the following factors:
– Emissions in the atmosphere
– Discharged liquids
– Waste disposal
– Soil contamination
– Use of raw materials and natural resources
– Local problems related to the environmental
impact
In order to minimise the environmental impact,
taken into account by all those that interact with
the engine for any purpose throughout its expect-
ed lifetime.
– All packaging components must be disposed of
in accordance with the legislation in force in the
country where disposal takes place.
– When installing and using the engine, ensure a
suitable air renewal in the room where the engine
is used, to protect the operators from a high con-
centration of unhealthy air and allow the correct
engine operation.
SAFETY WARNINGS FOR THE ELECTRICAL EQUIPMENT
The electrical equipment was designed and
manufactured according to the provisions of the
standards in force on the matter.
IMPORTANT
– Do not use quick starters to start the engine.
– Do not disconnect the electrical power sup-
ply when the engine is running.
English
etc.) in the environment and carry out separate
waste disposal according to the composition of
the different materials and in compliance with the
legislation in force. Electric and electronic compo-
nents should be carried out as special waste.
– While decommissioning the engine, separate
all the components depending on their chemical
composition and dispose of them accordingly in
compliance with local regulations in force.
IMPORTANT
Information about airborne noise and polluting
ITALY to the manufacturer of the boat where
the engine is installed.
CAUTION - WARNING
The responsibility for interventions of any kind
not authorised in writing by VM MOTORI FCA
ITALY lies on the person who performs it which
becomes de facto the manufacturer.
DANGER - WARNING
IMPORTANT
Before disconnecting the power supply, turn
off the engine and wait for at least 60 seconds.
Do not perform arc welding when the engine
electrical system is connected to the various
components of the engine.
16
42432070F
MR 506
Ed.1 - Nov. 2019
