Technical Characteristics - TRAPP TRP 30 Manual De Instrucciones

www.trapp.com.br
Due to the impact and constant vibrations caused
by chopping and grinding of materials, it is a natural
tendency for screws to loosen.
Check them periodically, and if necessary tighten
the loose screws. Be careful not to overtighten as
they may strip.
Power
Model
(cv)
TRP 30 1 - 1.25 (*) - 1.5
TRP 40 1 - 1.25 (*) - 1.5
TRP 400E 5 - 5.5 (*)
(*) Exportation only.
Model Power
TRP 400G 6.5 hp
TRP 400 (no motor)
This model is commercialized without motor but its base allows coupling to electric motor, gasoline and
diesel.
Type of
Modelo Power
motor
Electric 5 - 7.5 cv 220/380 Thre.
TRP 400
Gasoline 6 - 9 hp
(no motor)
Diesel 5 - 8 hp
To define the pulley to be used on the motor, proceed in the following matter: diameter of pulley multiplied
by shredder rotation and divided by the specified rotation on the motor plate.
Formula: Diameter of pulley x shredder rotation -> (chart above)
Tightening

Technical Characteristics

Rotation of the machine (rpm)
Voltage
(V)
50 Hz
-
127
220 3,000
127/220 3,000
220/380 4,100 - 4,400
Tank Crankcase
Type of
capacity capacity
(liters) (liters)
3 0.600 20W-50
Voltage machine
Type
(V) pulley
- -
- -
Example: if the motor is 4 poles (1,750 rpm)
200 x 1,600
1,750
Attention!
Always turn off shredder and unplug it before
servicing or cleaning.
Ø of
machine
60 Hz
pulley (mm)
3,600
3,600
80
Average
machine
Consumption
oil pulley
(liters/h)
(mm)
1.5
Ø of
Number of Belt
channels type
(mm)
80 2 A-43
Motor rotation
330,000
= = 182 mm
1,750
Production
Type green crop
- Monophase
- Monophase
Three-phase
Ø of
Rotation of Production
the machine green crop
(rpm)
80 4,100 - 4,400 3,000/4,000
Rotation
Production
Quantity of the
green crop
of belts machine
(rpm)
4,100 -
2
4,400
(kg/h)
500/900
500/900
3,000
(kg/h)
(kg/h)
3,000 -
4,000
45