Important Recommendations; Electrical Safety; Working Area - TRAPP TRP 30 Manual De Instrucciones

www.trapp.com.br
Congratulations!
You have just acquired a quality product with the highest tecnology developed by
TRAPP.
This product was designed to work quickly and efficiently, providing total safety, at
low cost.
Safety measures should be followed to operate this equipment.
The safety measures stated in this operating instructions do not cover all possible
situations which may occur during usage. The operator must be aware that good
sense, attention, and precautions cannot be incorporated into the product, therefore
caution should be taken when operating and servicing TRAPP shredders.
Attention!
Read all the instructions in this manual before
operating the equipment. Always observe
and follow the safety indications to prevent
accidents and/or injuries.
Read and keep these instructions
When using the grass mower always follow basic
safety precautions to reduce the risk of fire and
accidents, including those described below:

1 - Working area

Do neither use the equipment near explosive
 
environments nor near flammable liquids,
gases and/or dust under suspension. The
equipment electrical installation produces sparks
that may ignite flammable liquids, gases or dust
under suspension.
Keep children and away. People, especially
 
children, must remain at a safe distance from the
working area when the equipment is being used.
The operator/ user is responsible for accidents that
may occur.
Never leave the engine running in closed
 
rooms or non-ventilated places. The exhaust
gas (TRP 400G) contain carbon monoxide, a
lethal and inodorous gas.

Important Recommendations

2 - Electrical safety

Do not expose the equipment (TRP 40 /
 
TRP 400E) to either rain or humidity. Install the
equipment in a dry place, protected from weather
conditions. Water inside the equipment can
damage the electric circuit of the motor, besides
increasing the risk of an electric shock.
Before installing your, make sure the electrical
 
voltage in your property coincide with the
electric motor. Connecting electrical cables in
a different voltage will cause immediate motor
burnout resulting in a loss of warranty.
For your safety, ground the equipment. Failure
 
to do so may result in an accident, electrical shock
or personal injury.
If you need maintenance and spare parts, get in
touch with you local distributor or an authorized
technical assistant:
In case of further difficulties, get in touch with:
METALÚRGICA TRAPP LTDA.
Av. Pref. Waldemar Grubba, 4545 - Cx.P. 106
89256-502 Jaraguá do Sul - SC - Brasil
Phone: +55 47 3371-0088 / +55 47 2107-8800
Fax: +55 47 3371-1997
e-mail: [email protected]
41