Personal Safety - TRAPP TR 500 Manual De Instrucciones

3 - Personal safety

Beware with what is going on and use
 
common sense when operating the
equipment. Do not use it when you are
tired, distracted or under the influence
of drugs, alcohol or medicine. A slight
distraction may result in a serious injury.
Wear protection equipment. Always wear
 
goggles. Wearing protection equipment
like gloves, shoes, and ear plugs increases
your protection and reduces the risk of an
accident.
Dress properly. Do not wear loose clothes
 
or jewerly as they may be caught by movable
parts of the equipment. It is recommended
to wear gloves and shoes when working
outdoors.
Take precautions against accidental
 
running. Make sure the switch is set to "off"
before plugging the equipment in. Failure to
do so may cause a serious accident.
Remove all objects before turning on the
 
equipment. A tool or any other object stuck
in the movable parts of the equipment may
result in an injury.
4 - Use and care
Do not overuse the equipment. Use it in
 
the right way and for the purposes described
in this manual for better performance and
safety while working.
Do not use the equipment if the switch
 
does not turn on/off. The equipment
can not be controlled if the on/off switch
is damaged. A defective switch shall be
immediately repaired.
Switch off the circuit breaker, remove
 
the fuses or unplug the equipment before
servicing, substituting the cutting blades
and accessories. These safety preventive
measures reduce the risk of accidental
operation of the equipment.
38
Do not allow people that are not
 
familiarized with the equipment to use
it. The equipment may become dangerous
in the hands of people not familiar with its
operation.
Preserve your equipment. Frequently
 
check if the movable parts are fixed, if
any component is damaged or check
for any other condition that may affect
its optimum operation. Shall any problem
arise, fix it before using the equipment.
Many accidents are caused by lack of proper
maintenance.
Keep the cutting blade sharp and clean.
 
The cutting blade keeps moving after the
 
equipment is switched off. Therefore be
aware of that when servicing.
Use the equipment and accessories
 
according to the instructions in this
manual. Take in consideration the
working conditions and the service to be
done. Using the equipment for operations
not covered in this manual may result in
dangerous situations.
Do not grind rock, glass, metals, plastics,
 
chemical products or other items that
can damage the shredder mill.
Note:
According to the Brazilian standard
NBR 5410, it is compulsory to install a device
to protect against residual differential current
(DR device) in the electrical installation of
your residence. The function of the "DR" is to
protect the user against serious electrical shock
risk (consult an electrician).
5 - Service
Call qualified professionals to service
 
the equipment. Use original parts
only. Always call TRAPP Authorized
Service Technicians. TRAPP is not
responsible for occasional accidents
caused by the use of spare parts that are
not original.
www.trapp.com.br