Personal Safety - TRAPP TRC-40 Manual De Instrucciones

2 - Electrical safety (TRC-40)
Do not expose the equipment to either
 
rain or humidity. Install the equipment in a
dry place, protected from weather conditions.
Water inside the equipment can damage the
electric circuit of the motor, besides increasing
the risk of an electric shock.
Before installing your equipament,
 
make sure the electrical voltage in your
property coincide with the electric
motor. Connecting electrical cables in a
different voltage will cause immediate motor
burnout resulting in a loss of warranty.
For your safety, ground the equipment.
 
Failure to do so may result in an accident,
electrical shock or personal injury.

3 - Personal safety

Beware with what is going on and use
 
common sense when operating the
equipment. Do not use it when you are
tired, distracted or under the influence
of drugs, alcohol or medicine. A slight
distraction may result in a serious injury.
Do not leave shredder running and/or
 
unattended.
Do not turn on shredder if feeding funel
 
is open. In this position the blades will lock.
Wear protection equipment. Always wear
 
goggles. Wearing protection equipment
like gloves, shoes, and ear plugs increases
your protection and reduces the risk of an
accident.
Wear proper clothes. Wear neither loose
 
clothes nor jewelry.
Do not be self-confident. Keep both feet
 
on the ground to keep balance.
Take precautions against accidental
 
running. Make sure the switch is set to "off"
before plugging the equipment in. Failure to
do so may cause a serious accident.
32
Remove all objects before turning on the
 
equipment. A tool or any other object stuck
in the movable parts of the equipment may
result in an injury.
4 - Use and care
Do not overuse the equipment. Use it in
 
the right way and for the purposes described
in this manual for better performance and
safety while working.
Do not grind rock, glass, metals, plastics,
 
chemical products or other items that
can damage the shredder mill.
Do not allow people that are not
 
familiarized with the equipment to use
it. The equipment may become dangerous
in the hands of people not familiar with its
operation.
Should the shredder not achieve its full
 
contact service dealer
power capacity,
or an electrician to verify the condition
of your electric power source to avoid
motor burn-out by overload.
If after turning on shredder, motor does
 
not start, turn off immediately.
Verify that the blades are running
 
clockwise. Should blades be running
counterclockwise, contact service dealer or
an electrician to invert direction of rotation.
Do not use the equipment if the switch
 
does not turn on/off. The equipment
can not be controlled if the on/off switch
is damaged. A defective switch shall be
immediately repaired.
Switch off the circuit breaker, remove
 
the fuses or unplug the equipment before
servicing or substituting the blades. These
safety preventive measures reduce the risk of
accidental operation of the equipment.
Never put the equipment away with
 
gasoline in the tank (TRC-50). If necessary,
keep the engine running until it turns off due
to lack of gasoline.
www.trapp.com.br