Personal Safety - TRAPP TRF 50 Manual De Instrucciones

Trituradores forrajeros
Ocultar thumbs Ver también para TRF 50:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

3 - Personal safety

Beware with what is going on and use common


sense when operating the equipment. Do not
use it when you are tired, distracted or under the
influence of drugs, alcohol or medicine. A slight
distraction may result in a serious injury.
Wear protection equipment. Always wear


goggles. Wearing protection equipment like
gloves, shoes, and ear plugs increases your
protection and reduces the risk of an accident.
Wear proper clothes. Wear neither loose clothes


nor jewelry.
Take precautions against accidental running.


Make sure the switch is set to "off" before plugging
the equipment in. Failure to do so may cause a
serious accident.
Remove all objects before turning on the


equipment. A tool or any other object stuck in
the movable parts of the equipment may result in
an injury.
4 - Use and care
Do not overuse the equipment. Use it in the right


way and for the purposes described in this manual
for better performance and safety while working.
Do not use the equipment if the switch does not


turn on/off. The equipment can not be controlled
if the on/off switch is damaged. A defective switch
shall be immediately repaired.
Switch off the circuit breaker, remove the fuses


or unplug the equipment before servicing,
substituting the cutting blades and accessories.
These safety preventive measures reduce the risk
of accidental operation of the equipment.
48
Do not allow people that are not familiarized


with the equipment to use it. The equipment
may become dangerous in the hands of people
not familiar with its operation.
Preserve your equipment. Frequently check if


the movable parts are fixed, if any component
is damaged or check for any other condition
that may affect its optimum operation. Shall any
problem arise, fix it before using the equipment.
Many accidents are caused by lack of proper
maintenance.
Keep the cutting blade sharp and clean.


The cutting blade keeps moving after the


equipment is switched off. Therefore be aware
of that when servicing.
Use the equipment and accessories according


to the instructions in this manual. Take in
consideration the working conditions and the
service to be done. Using the equipment for
operations not covered in this manual may result
in dangerous situations.
Note:
according to the Brazilian standard
NBR 5410, it is compulsory to install a device
to protect against residual differential current
(DR device) in the electrical installation of your
residence. The function of the "DR" is to protect the
user against serious electrical shock risk (consult an
electrician).
5- Service
Call qualified professionals to service


the equipment. Use original parts only.
Always call TRAPP Authorized Service
Technicians. TRAPP is not responsible for
occasional accidents caused by the use of
spare parts that are not original.
www.trapp.com.br
Tabla de contenido
loading

Tabla de contenido