Abicor Binzel ROBO Compact W500 Manual De Instrucciones página 46

9 Maintenance and cleaning
9 Maintenance and cleaning
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Close off the gas supply.
• Close off the coolant supply.
• Disconnect the coolant supply and return hoses.
• Disconnect all electrical connections.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
DANGER
Risk of burns
Risk of burns from hot coolant and hot surfaces.
• Switch off the coolant recirculator before starting maintenance, servicing, assembly,
disassembly or repair work.
• Allow the welding torches to cool down.
• Wear the correct protective gloves.
NOTICE
• Only qualified personnel are permitted to perform work on the device or system.
• Check the coolant hoses, seals and connectors for damage or leaks and replace if
necessary.
• Always wear your personal protective clothing when performing maintenance and
cleaning work.
• Remove any adhered welding spatters.
• Check that all threaded fittings are secure.
EN - 18
ROBO Compact W500 / W600