Abicor Binzel ROBO Compact W500 Manual De Instrucciones página 50

9 Maintenance and cleaning
9.5 Cleaning the wire brake (optional version with wire brake)
Carry out each step in accordance with the figure below:
1
1
Torch neck
Fig. 9 Cleaning the wire brake
1 Unscrew the complete wire brake (2) from the torch neck (1).
WARNING
Risk of injury
Serious injuries may be caused by parts swirling around.
• When cleaning with compressed air, wear suitable protective clothing, in particular safety
goggles.
2 Detach the individual parts and air-blast with compressed air.
3 Check the O-rings for wear and replace them if necessary.
4 Grease the piston and O-rings with seal grease (included in the scope of delivery).
5 Reattach all individual parts in the reverse order.
EN - 22
A
B
D
2
Wire brake, complete
ROBO Compact W500 / W600
C
2