Idiomas disponibles
Idiomas disponibles
The trophon2 AcuTrace reader is located on the device as shown:
Figure 9. The AcuTrace Reader
AcuTrace-compatible products that have an embedded RFID chip can be
identified by this symbol:
Scan the symbol on the AcuTrace reader when prompted.
Products that are AcuTrace-compatible have this symbol on the outer packaging:
This symbol cannot be read by the AcuTrace reader.
The following products are compatible with AcuTrace:
trophon AcuTrace Operator Card
The trophon AcuTrace Operator Card links the HLD cycle to the operator responsible for the workflow.
For example, the screen of the trophon2 device prompts the operator to scan their Operator Card against
the AcuTrace reader when preparing a probe for disinfection and at the completion of disinfection cycle.
When scanning the Operator Card, ensure it is kept still against the AcuTrace reader, until
the trophon2 device acknowledges that the card has been read.
Refer to the trophon2 Installation Guide for further information on how to program a trophon AcuTrace
Operator Card.
Following is a summary of the information fields stored for each operator in their Operator Card.
Field name
Operator name
Operator ID
Size
Recommended or example use
25 characters Operator name, operator initials,
operator unique ID
20 characters For example, internal staff ID number
L03192 3.0 06/2022
19
