B1.2 Cable Tray; Section B2: Installation Guide; B2.1 Positioning Your Trophon2 Device - Nanosonics trophon2 Manual Del Usuario

B1.2 Cable Tray

The cable tray holds the probe cable away from the
chamber door and stores the cable during HLD.
Remove the tray for cleaning, as shown in Figure 6
and wipe with a cloth moistened with a soapy
solution.

SECTION B2: Installation Guide

B2.1 Positioning your trophon2 Device

The trophon2 device weighs approximately 22 kg (48.5 lbs). Follow your facility's
manual handling procedures for guidance on lifting heavy objects.
The trophon2 device can be mounted on a bench, wall or cart.
1. Ensure the surface is level, can support the weight and allows adequate airflow (see Appendix 1:
trophon2 Device Technical Specifications N05000-2).
2. There are no specific illumination requirements for using the trophon2 device. Follow your facility's
standard for work environment illumination guidance.
3. Ensure the area around your trophon2 device is free from other equipment and clutter. Position
as shown in Figure 7 to ensure access to all features.
The trophon2 device can also be mounted to the wall using the trophon Wall Mount 2 or for a mobile
solution, use the trophon Cart. Please refer to the product IFUs for details.
The trophon2 device should be placed at a height from the floor level to accommodate a
range of user heights. Refer to Figure 8 for a guide to an ergonomically safe work zone.
15
L03192 3.0 06/2022
Figure 6 Cable Tray