Idiomas disponibles
Idiomas disponibles
CHECKS AND MAINTENANCE
CHAIN
To increase the logevity of the chain, it is recommended that you periodically check the tension and always
keep it clean and lubricated.
The lubricant must not under any circumstances get on the rear tire or the brake disc, otherwise the grip of
the tire on the ground and the action of the rear brake would be reduced, this is very important as control of
the bike could to be impaired.
Adjusting the chain tension
50 mm
A
B
98
If the chain slack exceeds 50 mm you must adjust it.
• Loosen the axle nut
• Loosen the lock nuts
swingarm.
• Use the adjusting screws
reaching the desired tension.
• Tighten the lock nuts
swingarm.
1
• Tighten the axle
torque.
.
1
on both sides of the
A
on both sides until
B
on both sides of the
A
according to the specified
1
