Idiomas disponibles
Idiomas disponibles
CHECKS AND MAINTENANCE
2
Remove the oil filter cover, on the right side of the
engine, after having removed its three screws
Replace the oil filter, making sure that it is fitted in
the right direction: the filter cover pin must enter the
filter through its open side.
Reassemble in reverse order, taking care to ensure
that the correct condition/positioning of the O-rings
of the oil filter cover and drain plug.
Pour 0.95L of oil through the filler cap and check the
level as described above.
TIGHTENING TORQUES:
Oil filter cover screws
Drain plug
OIL QUANTITY
Without oil filter change
With oil filter change
.
2
10 Nm
32 Nm
0,85 L
0,95 L
89
