Juicing - Silvercrest SSJ 300 C1 Instrucciones De Uso

Juicing

►
ATTENTION! PROPERTY DAMAGE!
►
►
1) Insert the plug of the power cable 9 into a mains socket.
NOTE
►
2) Add a part of the ingredients into the feed tube 2.
3) Place the appliance's On/Off switch 7 into the "I" position. The appliance
will begin working.
NOTE
►
4) Add more ingredients to the feed tube 2. If required, use the pusher 1 to
press the ingredients carefully into the feed tube 2. While the ingredients
are being processed, add further pieces into the feed tube. Do not switch off
the appliance while processing.
SSJ 300 C1
WARNING! RISK OF INJURY!
Never insert your fingers or any objects into the feed tube 2 while the
appliance is operating. This could lead to serious injuries and/or damage
to the appliance.
Do not operate the appliance for longer than 15 minutes (CO time) without
a break. Allow the appliance to cool down after 15 minutes of continuous
operation. Otherwise, the appliance could be damaged.
Do not start the appliance until you have added ingredients to the feed
tube 2. Never operate it without ingredients.
If you want to move the On/Off switch 7 from the "I" position to the "R"
position or back again, always start by moving the On/Off switch 7 to the
"O" position (off) and wait until the motor has stopped.
Normally, the appliance draws in the prepared ingredients automatically
once they have been placed in the feed tube 2. Push gently with the
pusher 1 if you notice that the ingredients are not being drawn into the
appliance, otherwise the appliance may block.
GB │ IE │
15 ■