Idiomas disponibles
Idiomas disponibles
Pairing
A Bluetooth® device needs to be paired with a different specific device in order
to communicate with that device. If this monitor is paired with a receiver device
from the start, measurement data is transmitted automatically to the receiver
device each time a measurement is made.
Cautions for pairing
Only one device can be paired with this monitor at one time. If the receiver
device cannot receive measurement data, try pairing again
If another receiver device is paired, the first device will be unpaired to
enable the new device to be paired.
Follow the steps below to pair the monitor with a Bluetooth® compatible
receiver device. Also refer to the manual of the receiver device. Please use
a pairing wizard if one is provided.
Pairing procedure
1.
Follow the instructions in the manual of the receiver device to switch it to the
pairable status. When pairing this monitor, place it as close as possible to the
receiver device to be paired with.
2.
Install the batteries or connect the AC adapter as
described on page 8.
Press and hold the
are displayed, and then release the button.
The monitor will be in a state that can be found by the
receiver device for about one minute.
3.
The monitor displays
complete.
4.
If
is displayed or pairing is failed, remove the
batteries or disconnect the AC adapter and try steps
1-3 again.
5.
Follow the manual of the pairing receiver device to search for, select and
pair with this monitor.
Using the Monitor
button until
to indicate that pairing is
English 10
