A&D UA-656BLE Manual De Instrucciones página 10

Installing / Changing the Batteries
1. Remove the battery cover.
2. Remove the used batteries and insert
new batteries into the battery
compartment as shown, taking care that
the polarities (+) and (-) are correct.
3. Replace the battery cover.
Use only LR6, R6P or AA batteries.
CAUTION
Insert the batteries as shown in the battery compartment. If installed
incorrectly, the device will not work.
When
with new ones. Do not mix old and new batteries. It may shorten the battery
life, or cause the device to malfunction.
Replace the batteries two seconds or more after the device turns off.
make a blood pressure measurement. The device may then recognize the
new batteries.
The battery life varies with the ambient temperature and may be shorter
at low temperatures. Generally, four new LR6 batteries will last
approximately for one year when used twice for measurement each day.
Use the specified batteries only. The batteries provided with the device
are for testing monitor performance and may have a limited life.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
Connecting the Air Hose
Insert the air connector plug
into the air socket firmly.
Connecting the AC Adapter
Insert the AC adapter plug into the
DC jack. Next, connect the AC
adapter to an electrical outlet.
Use the specified AC adapter.
(Refer to page 21.)
When disconnecting the AC adapter
from the electrical outlet, grasp and pull
the AC adapter body out of the outlet.
When disconnecting the AC adapter plug from the blood pressure
monitor, grasp and pull the AC adapter plug out of the monitor.
Using the Monitor
blinks in the display, replace all batteries
appears even after the batteries are replaced,
does not appear when the batteries are drained.
English 8
Step 3
Air Hose
Air Connector Plug
Air Socket
AC adapter plug

Step 1
Step 2
DC jack