Speck pumpen BADU 93 Serie Manual Del Usuario página 12

Glossary
TD Technical data
Sa Inlet connection
Da Outlet connection
d-Saug Recommended diameter for the suction line from 5 m
d-Druck Recommended diameter for the pressure line from 5 m
max. L Maximum length of the pump
D Density
P Power input
1
P Power output
2
I Rated current
Lpa Sound pressure level at 1 m measured in accordance with DIN 45635
(1 m)
Lwa Acoustic capacity
m Weight
WSK Built-in or external overload switch
PTC PTC resistor
H Total dynamic head
max.
SP Self-priming
Hs; Hz Geodetic head between water level and pump
Hs Total suction head
Hz Total dynamic head with flooded suction
IP Type of motor enclosure
W-Kl Class of insulation
n Motor speed
P-GHI 2.5 bar max. casing pressure/system pressure
T Water temperature
● Yes
○ No
T/°C Clarification of the max. water temperature 40 °C (60 °C): 40 °C = the
max. water temperature allowed according to the GS approval.
(60 °C) = the pump is designed to withstand a max. water
temperature of 60 °C.
1~/3~ Suitable for continuous operation at
1~ 220 - 240 V ± 5%
3~ Y/∆ 380 - 420 V/220 - 240 V ± 5%
3~ Y/∆ 660 - 725 V/380 - 420 V ± 5%
For standard voltage in accordance with DIN IEC 60038;
DIN EN 60034
B
For special voltages and/or the 60 Hz version, the performance data can
be taken from the pump name plate. If the values in these instructions are
different to the values on the type plate, the values on the type plate must
be used. With some special types or motors there is no GS approval – GS
approval on pump name plate where applicable.
EN 12 09|2021